Features:
- Dual Operator Workstation Continuous Monitor
Continuously monitors the path-to-ground integrity of two operators and one ESD worksurface - Wave Distortion Technology
Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor - IMPROVED Operator Alarm
Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent - NEW Park Delay Timer and ParkSnap™
Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm - NEWÂ Visual Status Display
Displays the operators’ and worksurface status: illuminates red when intermittent or failed connection occurs - NEW Mat Monitor Switch
Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface - NEWÂ Audible Alarm Adjustment
Sets the audible alarm volume from loud to louder - NEWÂ 19323Â Power Relay Accessory
Controls power to workbenches, hand tools, and other electronic devices dependent on the Dual Operator Continuous Monitor’s status - Single-wire Impedance Design
Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0 - 1.2 Volt Operator Test Voltage
Reduces the risk of electrical overstress (EOS) for the handling of sensitive components - <50 Millisecond Alarm Response Time
Identifies failures and intermittencies - Calibration Verification
Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations - NIST Calibrated – Original Calibration Certificate can be DownloadedÂ
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. - 100-240VAC Safety Certified Power Adapter with North American Plug
Works with standard electrical systems in North America, Japan, and Asia - Made in the United States of America
Reviews
There are no reviews yet.