Full-Time Monitor, with North America Power Cord

Features:

• Single Workstation Continuous Monitor
  Continuously monitors the path-to-ground integrity of one operator, one ESD worksurface, and the electrical ground used to by the monitor.
• NEW Monitored Ground Terminal
  Provides a verified ground point for mats, carts, tools, and other items. Connect with the 09842 Multi-Ground Hub.
• NEW Light Tower Jack
  Connects with 19332 Light Tower Accessory
• NEW Auxiliary Jack
  Connects with 19333 Power Relay Accessory
• Wave Distortion Technology
  Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
• AC Outlet Monitor Circuit
  Verifies the wiring of an AC outlet and continuously monitors its path-to-ground integrity; fulfills the ANSI/ESD S6.1 section 6.3.1 requirement
• Park Delay Timer and Park Snap
  Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
• Embedded Relay Terminal
  Activates when a failure is reported by the monitor. Integrates with electronic locks, lights, and buzzers.
• Mat Monitor Switch
  Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
• Audible Alarm Adjustment
  Sets the audible alarm volume from loud to louder
• Enclosure with Mounting Tabs
  Installs in workbench and equipment environments
• Single-Wire Impedance Design
  Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
• 1.2 Volt Operator Test Voltage
  Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
• <50 Millisecond Alarm Response Time
  Identifies failures and intermittencies
• Continuous Visual and Audible Alarms
  Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs
• Calibration Verification
  Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
• NIST Calibrated – Original Calibration Certificate can be Downloaded
  Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
• 100-240VAC Input with North American Power Cord
  Works with standard electrical systems in North America, Japan, and Asia
• Made in the United States of America